Gallery
Contat Us: +254721414663
info@ndt-ea.com
ndteastafrica@gmail.com
info@ndt-ea.com
ndteastafrica@gmail.com
Our Experts at Work
Our Gallery
Typical NDT Tests on Concrete Elements
Reinforcement Mapping on an assumed column section
Schmidt Hammer Test at one of first floor slabs
Reinforcement Scanning at one of the Ground Floor Beams.
Conducting UPV Tests at one of the ground floor columns.
Inspection of Foundation Columns
Some of the Trial Pits exposing the Subsurface Material
Reinforcement Mapping on a column and beam sections
Schmidt Hammer Test on a column and a beam
Conducting UPV Tests on Column and Slab elements.
One of the beam sections indicating substandard corrective works (Plastering over pains).
On of the beam sections depicting substandard works during concreting
Severe rebar corrosion
Extreme structural dampness
Slab-soffit substantially affected by concrete spalling.
Structural Cracks
Typical Infrared Thermography
Structural Dampness at a first-floor section
Structural Dampness at the landings.
Extreme Structural Dampness on a roof slab.
Structural Dampness at a first-floor section.
Variation in heat absorption at one of the exterior sections.
A rear section depicting variation in structural dampness.
Structural Dampness at a bathroom
Structural Dampness at a bedroom
Structural Dampness at one of the washrooms
Structural Dampness at a Section on the RHS-Accommodation Unit
Structural Dampness at a Section on the LHS-Accommodation Block
Extreme Structural Dampness at a Section on the Washroom ceiling
Typical Reinforcement bar Scans
Reinforcement Mapping at a First Floor Slab, Grid H-M/1-2
Reinforcement Mapping at a Second Floor Beam M/8-11
Reinforcement Mapping at a Foundation Column Grid B-1
For Structural Audit Services
Contact us through:
+254721414663
ndteastafrica@gmail.com
ndteastafrica@gmail.com
or Contact Us